Ovation UKII

The guitar featured a hollow body aluminum frame encased in a mold of urelite, which is basically a really dense urethane foam. This made the guitar very light and the hollowness gave it a very distinct sound. The neck of the guitar was glued to the body and then bolted to the frame, along with the hollow body this would allow for maximum sustain. The pickups were custom made by Ovation to try to be the most innovative and amazing new thing out at the time. Each coil was wound 10,000 times, much more than most pickups, resulting in a very high amplitude yet clean output. The pickups also included coil tap switches that would switch the wiring in the pickups from in series to parallel, effectively turning the hum bucker into a single coil in sound quality on the fly. The guitar also had a mono and a stereo output, where the stereo separated the two pickups into their own channels.

The UKII came in several different varieties:

• chrome or gold hardware (bridge/tuners/etc)
• several finishes usually painted to look like the grain of wood
• abalone rectangle inlays or mother of pearl bowties (signature look) on the fretboard which was made of ebony
• an optional pickguard

The number of UKII's produced is not quite known, but ranges between 2,000 - 3,000 between 1979 and 1983. Like all other ovation solid body guitars of the time, it came with its own serial number and hard case. Ovation stopped producing solid bodies in the mid 80s and the UKII has become one of the rare collector's items along with other Ovation solid bodies like the Breadwinner and Ultra GP.